ETS-Lindgren 8000-003, Руководство пользователя

Страница: 13 / 25

www.ets-lindgren.com Before You Begin 13
4.0 Before You Begin
CAUTION: Before connecting any components, see Safety Symbols on
page v.
Unpacking

The 8000-003 amplifier system is supplied fully assembled in a 19 inch 25U rack.

If any signs of damage are found no attempt should be made to install or operate
the amplifier system. Contact ETS-Lindgren Customer Service immediately to
report the problem.

If the shipping carton has been damaged, retain the shipping carton and packing
material for the carrier's inspection. Check that the equipment is complete and is in
an undamaged condition, and then contact ETS-Lindgren Customer Service for
further advice.
Safety Information

This RF amplifier has been designed and tested in accordance with BS EN61010-1
and has been supplied in a safe condition. This manual contains warning
information which must be followed to ensure safe operation and to retain the
apparatus in a safe condition.

This apparatus does not incorporate components liable to explode or implode
during normal operating conditions.

In normal operating conditions this apparatus does not liberate injurious or
poisonous gases.

Sound levels of this apparatus in a rack are below 85dBA as required by
EN61010-1.

If local regulations have a lower limit, appropriate action should be taken in line
with the local regulations so as to comply.

This apparatus is of Installation Category 2.