3G FWP ETS-6688 User Manual
4
10)
【
Talk
】:
Outgoing with the dialed phone number immediately. In idle state, pressing this
button will be into “Outgoing Call log”.
11)
【
Redial
】:
Redial the last call phone number.
12)
【
H.F.
】
:
Press this button instead of taking up handset.
13)
The Number key 1,2,3,4,5,6,7,8,9,0 and *, #
4. Installation
4.1 SIM card installation
Open the battery cover and take away battery, then the SIM slot can be seen. Please insert SIM
card into the SIM slot.
4.2 How to use the phone
4.2.1 Turn On phone
After install SIM card and battery. Press power ON/OFF button
3 seconds, the phone will be
power on, The LCD screen shows operator name, time, signal and capacity of battery. Then you
can make/receive calls.
4.2.2 Turn Off phone
Press button
3 seconds to power off the FWP from the working state.
4.2.3 Make a call
Dial numbers: dial numbers and the numbers will be shown in the screen. If the numbers that
user dialed is wrong, please press “BACK” in order to clear the number.
After finishing inputting number, please press key “TALK” to call out at once. If not press
key “Talk”, it will delay several seconds, then call out automatically.
During call, user can adjust volume by pressing left button or right button.