background image

 

4

Transmitting power<3W 
AC-Adapter interface: Input: AC 110~240VAC    50~60Hz 
                                      Output: 12DC 1A. 

AC-Adapter type: EU, US, AU, British can be optional 

4, Operation Circumstance:

 

 

Operation temperature: -10c~60C 
Storage temperature:-20C~70C 
Operation humidity: 45%-95%   
Atmosphere pressure: 86-106Kpa 
Environment noise: <60DB 
Transmitting Power: 2W 
Sensitivity: <-104dbm 
Antenna Amplifying: >2.5db 
Dialing frequency: 450Hz 
Hanging voltage: 45V 
Picking current: 30mA/41mA 

5, Check Package:

 

 

ET-8848 GSM FWT 

1 piece

Ac-adapter 12V 1A: 

1 piece

,  

GSM Antenna with 3m cable 

1 piece

,  

User’s Manual

 1 piece

G.W: 

0.75kg

 per unit. And 

20pcs per carton

16kg per carton.

 

Gift carton Measurement: 

55cmX34.5cmX32.5cm 

6, Installation and Connection 

The Condition for Installation 

The terminal asks for 110- 220V AV power supply. It must be installed in the area where the 
GSM network can cover. The strength of the signal can affect the quality of voice. 
1.  Screw off the screws that are on the back of the terminal, Insert SIM card for every Sim card 

holder, and then tighten the screws. 

2.  Install antenna. In order to ensure the quality of voice, antenna must be put beyond 1.5 from 

the telephone and terminal. 

3.  On end of the telephone line connects to the “Phone” port of the terminal, the other end 

connects to telephone. 

4.  “Power” port connects to power adapter that is connected to 110-220V AC power supply. 

1) The Installation for Connecting to Ordinary Telephone 

 

Содержание ET-8848









Отзывы: