CONFIDENTIAL
10/29/20 1:52:12 PM – IFU
This document may contain information that is confidential or attorney-client privileged and may constitute inside information. The contents of
this document are intended only for the recipient(s) listed above. If you are not the intended recipient, you are directed not to read, disclose,
distribute or otherwise use this document. If you have received this document in error, please notify the sender immediately and delete the
document. Delivery of this document is not intended to waive any applicable privileges
©2020 ETROG SYSTEMS LTD.
8
Preparation and Application
Note: Please fully charge the device before start of use.
MULTI
VS
ES008 Patch
1.
Take device and attach to patch via magnetic connectors. Retain the adhesive backing of
patch.
2.
Select the location for patch placement on body as per the diagram below. ensure it is
free from hair and skin is intact.
3.
Use isopropyl alcohol to clean the skin area where the patch is intended to be placed
and allow site to fully dry.
4.
Remove the adhesive backing from the patch and apply to prepared skin. Press down on
patch ends to ensure it is well adhered to skin. Note: keep the adhesive backing in a clean place
for later use.
Right
Regul
arft
Upper Left position
Regularft
Mid position
Regularft
Left
Reg
ularf
t
