background image

Aluminum Folding J-Rack Kayak Carrier

Instruction Manual

e98878

Parts List

x2

x2

x2

x4

x4

x4

A

B

D

F

 C

x2

G

x2

H

x2

I

E

I

Part #

Description

QTY

A

B

C

D

E

F

G

H

Folding Cradle

Bolt

Flat Washer

Mounting Bracket

Knob

Rack Anchor Straps

Strap – Buckle End + Free End

Strap – Buckle End + Loop End

Strap – Free End + Loop End

2

4

4

2

4

2

2

2

2

Warning:

Please read and understand all instructions before use. Failure to follow the instructions may cause serious property 

and / or personal damage.

Keep this manual for future reference.

Load bars must be at least 24" (610mm) apart for safe use.

Do not exceed the carrier’s load capacity of 68kg/150lb.

Do not exceed the loading capacity of cross bars

Do not modify this carrier or use it for unintended purpose.

Check the condition of the carrier before each use. Do not use if any parts are damaged. Contact etrailer.com for 

replacement of damaged parts.

Secure bow and stern to vehicle with included straps

Periodically check the condition of the carrier and straps during a long driving and retighten if necessary.

This carrier is intended for use with kayaks and similar single occupant water craft.  Use with items and water craft that 

does not fit this description could damage the carrier and cause injury to user or others.

Take the height of the load on your vehicle roof into consideration while driving through  limited spaces such as tunnels, 

garages, parking structures, etc.

Store the carrier in dry and cool place when not in use. Remove all salt and debris from carrier after use for best results.

Keep carrier out of reach of children.

Содержание e98878






Отзывы: