ETQ TG5250, Руководство пользователя

Страница: 14 / 71

ETQ
EASTERN TOOLS & EQUIPMENT INC Tel: (888)908-6200 Web Site: easterntools.com
11
CONNECTING ELECTRICAL LOADS AND
ELECTRICAL CAPACITY
After starting the generator, let the engine warm
up after connecting electrical loads to it. Do not
have any electrical loads connected before
starting the generator.
Make sure all electrical devices are 60 Hz
devices.
Do not connect 50 Hz devices to the generator.
Do not connect 3-phase loads to the generator.
Do not overload the generator.
Before beginning your work, you must verify
that the rated (running) and surge (starting)
watts for the items you will power at the same
time are within the generators operating
capacity. Please refer to the following Table 1
for wattage / amperage ratings. Also, to prolong
the life of your generator, prolong the life of your
generator, sequentially add loads and permit
the generator to stabilize before adding another
load. Never exceed the capacity of the
generator.
Estimate how many surge (starting) watts you
will need. Surge wattage is the short burst of
power needed to start electric motor-driven
tools or appliances such as a circular saw or
refrigerator.
Table 1. Wattage reference chart
Tool or Appliance
Rated
(Running)
Watts
Additional
Surge
(Starting)
Watts
Essentials
Light Bulb – 75 watt 75 -
Freezer 500 500
Sump Pump 800 1200
Refrigerator / Freezer – 18
Cu. Ft.
800 1600
1/3 HP Water Well Pump 1000 2000
Heating/Cooling
Air condition – 10000 BTU 1200 1800
Window Fan 300 600
½ HP Furnace Fan Blower 800 1300
Kitchen
1000 Watt Microwave Oven 1000 -
Coffee Maker 1500 -
Single element electric stove 1500 -
Hot plate 2500 -
Family Room
DVD / CD Player 100 -
VCR 100 -
Stereo Receiver 450 -
27 “ Color Television 500 -
Personal Computer w/17”
monitor
800 -
Other
Security system 180 -
AM / FM clock radio 300 -
½ HP Garage door opener 480 520
40 Gallon electric water
heater
4000 -
DIY / Job Site
Halogen work light 1000 -
1/3 HP Airless sprayer 600 1200
Reciprocating Saw 960 960
½ HP Electric Drill 1000 1000
7 ¼ “ Circular saw 1500 1500
10” Miter saw 1800 1800
6” Table Planer 1800 1800
10” Table saw / Radial arm
saw
2000 2000