ETQ 170F, Руководство пользователя

Страница: 17 / 89

Oiling plug:
In winter, if it is difficult to start the
engine, pull the plug out and fill 2cc of lube oil
into the hole and then put the plug back in
place. Make sure the plug is tight, if not, the
engine can absorb dust into the combustion
chamber and damage itself.
Compression release lever:
Push the lever down
to start the engine
Muffler
The factory has replaced the
engine fuel and engine oil
once already. To check the
fuel pipeline, make sure the
fuel line is completely drained.
IF there is air in the pipeline,
drain it out. To do
this, loosen the nut between
the injection pump and fuel
pipe, then drain out the air
until there are no bubbles
left in fuel line.
Oil Lubricant Inlet:
Place the engine on level ground and fill the lubricant into the inlet. When checking the
oil level, gently place the dipstick into the oil. Do not turn the oil scale.
17