Operating instructions
Connecting
1. Place hydraulic-connector at end of hose on the high pressure valve.
Ensure that the valve is free of impurities!
2. Close the air release screw.
Applying pressure
3. Actuate lever until gauge indicates pre-selected pressure.
Disconnecting
4. It is imperative that the following procedure is adhered to, otherwise the valve
may come off or the nozzle may be damaged.
5. Turn pressure release screw half a turn to the left. Never unscrew it completely.
Grease will flow back into reservoir. Wait until pressure has decreased.
6. Remove hydraulic-connector with a slight turn from the high-pressure valve.
7. Close pressure release screw.
10
Monteringsinstruktion pump M08:Layout 1 2021-01-25 17:03 Sida 10
