ETOP ATX-E15, Руководство пользователя

Страница: 13 / 90

ATX-E15 User`s Manual 5

USB Interface :

Ten USB 2.0 ports compliant with USB Specification Rev.
2.0 and support USB Hot-Plug function.

Four ports on rear penal with type-A connector for external
USB devices.

Six ports in two 2x5/2.54mm box header for internal USB
devices connection.

Support Legacy USB devices and Boot from USB devices like
USB-HDD, USB-Floppy and USB-CDROM.

All USB ports support USB type keyboard and mouse.

SATA and PIDE:

One USB bridged PIDE controller support up to UltraDMA
mode 5 or ATA100 speed. It is for 2’nd storage for DVD
player, CF cards and Backup HDD.

One standard 40-pins Box header to support 3.5” HDD, DVD
Player or DOM Flash Disk.

One Compact Flash-II socket shared with PIDE Channel. One
jumper to select as Master or Slave device.

Six SATA ports support up to 6 SATA devices. Support RAID0,
RAID 1, RAID 5, and RAID10. SATA RAID BIOS is integrated in
System BIOS.

Gigabit and 10/100M Ethernet:

Two Realtek RT8111C chips on board for dual GbE LAN
support.

Support Wake-on-LAN.

Remote Boot Agent is supported with PXE or RTL protocol.

Audio:

RealTek ALC888 High-Definition Audio chip on-board.

Three Audio-Jack on rear panel for Audio Line-Out, Line-In
and Microphone.

One 14-pins pin-header to provide internal audio device
connection or surrounding speaker connection.

One CD-IN to support DVD player audio input.

One SPDIF interface to support SPDIF digital audio input and
output.

PCI and PCI-Express Expansion Slot:

Five 5V 32-bits PCI slots for PCI 32-bits 5V/3V Add-on Cards.

One PCI-Express x16 slot for high-end graphics add-on card.

One PCI-Express x4 slot for high-end Storage RAID Cards or
Multiple-ports LAN Cards.

Hardware Monitor:

83627HF integrated hardware monitor chip to monitor