Eton EXL-50 - SERVICE, Руководство по обслуживанию

Страница: 10 / 32

The filter should be replaced every 600 hours
of operation and at the start of each season.
To replace the filter, carefully compress the
wire clamp rings until the clamp is free of the
fuel line. Slide each clamp away from the filter
about ".
Remove the filter from the fuel line by holding
the line and pulling the filter. Install the new
filter by inserting the filter into the fuel line and
returning the clamps to the original position.
Start the engine and check for leaks. Inspect
the fuel lines for cuts, abrasions and
deterioration. Replace fuel lines as needed.
DO NOT start or operate the engine if the fuel
filter or lines are leaking. Leaking fuel can
cause a fire.
3
/
4
Tire & Wheel inspection
It is important to inspect your tires and wheels
for damage and wear before each riding
session. Inspect each tire for cuts, tears and
punctures. Inspect the wheel rim for dents and
separation of the wheel from the tire bead.
Replace any tire or wheel found to be
damaged.
Operating your ATV with damaged tires or
wheels is dangerous. Damaged tires or wheels
can result in a sudden loss of tire pressure and
control which could result in injuries.
Tires and Wheels
Check your tire pressure before each riding
session and at each refueling operation.
Always check the pressure when the tires are
cool. Use the tire pressure gauge that came
with your ATV to check the tire pressure.
CONTROL FEATURES CONTROL FEATURES
¡¹
Tire Press ure
¡¹
The recommended pressure: 0.8 bar (12 psi)
Max. Pressure: 1.7 bar (25 psi)
The pressure should be checked when the
tires are "cold"before running the vehicle.
Page 10
Fuel Line
Vacumn
Control
Line
Inline Fule Filter Inline Fule Filter