7) CO level display (PPM). If Natural Gas is detected display will show GAS
8) Ambient Light (Lux) sensor controls the on / off status of the nightlight
9) Pair / Flashlight Button - Press and hold while plugged into AC power until nightlight
blinks to reset Wifi to pair to a new network When unplugged from AC power this button will
turn flashlight on / off
10) Peak CO level indicator button. Press to read the peak level of CO seen. Press and
hold to reset the peak level
11) Test button, press and hold to test CO / Gas Alarm. Press and release to silence a CO
triggered alarm
8
9
10
7
11