Quick Start
Copyright 2003-2004 by HDS Systems, Inc.
All rights reserved
March 22, 2005
The following instructions will give you a quick start to using your EDC Ultimate™
flashlight. Please refer to the User’s guide for detailed information.
Click
: a quick push of the button - less than half a second.
Press
: a long push of the
button - longer than half a second.
N-click
: a sequence of 2, 3 or 10 clicks.
N-click-press
:
a sequence of 2 or 10 clicks followed immediately by a press.
From Off
• Click to turn on - stays on after button released
• Press to turn on:
stays on after button released (Simple Momentary disabled)
momentary - turns off when button released (Simple Momentary enabled)
• Triple-click - lock or unlock button (Automatic lock enabled)
• 10-click - enter option menu - see below
• 10-click-press - enter brightness menu - see below
From On
• Click to turn off
• Press for momentary Maximum setting - returns to previous setting when button is
released
• Double-click to toggle Primary/Secondary setting or change back to last Primary/
Secondary setting from Minimum or Maximum setting
• Double-click-press to change to Maximum setting
• Triple-click to change to Minimum setting
Brightness Menu
- enter with 10-click-press from Off. Click to move to the next
brightness. Double-click to reverse and move to the previous brightness. Press button
for 2 seconds to set - indicated by 2 seconds of steady light and then turns off. Error
flash sequence indicated by rapid flashing - setting not changed. To change setting, turn
off Force Setting if enabled, select desired setting, turn light off, enter brightness menu,
select new brightness level, set, turn on Force Setting if desired.
