![Etnyre Black-Topper Shooter II Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/etnyre/black-topper-shooter-ii/black-topper-shooter-ii_operation-maintenance-and-safety-manual_2433790008.webp)
GENERAL
7
WARNING
To prevent severe injury from becoming
entangled in machinery: Stand clear of rotating
drives.
To prevent possible injury: Always open the
manhole cover slowly. Pressure build up in the
tank may cause the cover to burst open.
To prevent possible fire hazards, burns or falls:
Keep the unit clean for safe operation.
To prevent possible burns from material
overflow: Allow sufficient space in the tank for
expansion of the material when heating
Before removing the fill line cap, make certain
that the asphalt pump is turning and the
suction valve is closed.
To prevent possible personal injury: Do not
load the vehicle beyond the GAWR or GVWR.
The maximum load volume must be calculated
based on material density
To prevent possible burns: Use extreme
caution when using a torch to heat the pump.
Asphalt accumulated around the pump may
ignite when heating the pump with a torch
Allowing the burners to operate for a long
period of time without circulating can damage
the product and create explosive fumes. If
product cannot be circulated after fifteen
minutes of heating without circulation, the
burners should be extinguished for 20 - 30
minutes before re-lighting the burners.
To prevent burns: Always wear eye protection,
long sleeve shirt, insulated gloves, boots, and
long pants outside the boots when working
around the distributor.
To prevent an explosion or fire hazard: Flues
,must be covered by a minimum 6 inches of
material (bitumen) when burners are in
operation
Use the measuring stick as shown in figure 1 to de-
termine the amount of product in the tank before light-
ing burners. The minimum amounts shown on the warn-
ing placard only apply if the tank is level. Remember
that the measuring stick is accurate only when the
tank is level. If the tank is not level, reposition the dis-
tributor to place the tank in a level position before tak-
ing final measurement. You must have at least the
amounts shown, with the tank level, in order to safely
light the lower burner and upper burner respectively.
Failure to have the appropriate amount, accurately
measured can result in an explosion causing death
or serious injury.
Содержание Black-Topper Shooter II
Страница 3: ...2 ...