ETNA T303ZT, Инструкция по эксплуатации

Страница: 22 / 68

EN 6
USE
Please note
• Grains of grit may cause scratches which cannot be removed. Only
put pans with a clean base on the cooking surface and always pick
pans up to move them.
• Do not use the hob as a worktop.
• To avoid energy loss, always keep the lid on the pan when cooking.
Please note
Never use pans with a misshapen base. A hollow or rounded base can
interfere with the operation of the overheating protection, causing the
appliance to become too hot. This may lead to the glass top cracking
and the pan base melting. Damage caused by using unsuitable pans or
boiling dry is excluded from the guarantee.
Minimum pan diameter
• The diameter of a pan must be at least 11 cm (for a cooking zone
of Ø 160) and 14.5 cm (for a cooking zone of Ø 200) The best
results are achieved by using a pan with the same diameter as the
cooking zone. If a pan is too small the zone will not work.
Pressure cookers
• Induction cooking is very suitable for pressure cookers. The fast-
reacting cooking zone brings the pressure cooker to pressure
quickly. As soon as you switch a cooking zone off, the cooking
process stops immediately.
The power level adjusts itself
• In induction cooking, only the zone on which the pan in placed
is used. If you use a small pan on a large zone, the power will be
adjusted to the diameter of the pan. The power will thus be lower
and it will take longer before the food in the pan comes to the boil.