14
© ETNA Coffee Technologies b.v.
Instruction for use Nova freshbrew FT
C O F F E E T E C H N O L O G I E S
2.7
Operating the machine
Although the standard model does not include a payment mechanism,
the option exists for the machine to be equipped with a coin
mechanism (for instructions on how to install the payment mechanism,
see the operating instructions included with the mechanism).
2.7.1 Strength control
Select the drink by pressing the button.
The strength can be changed by pressing the selected drink again.
This is also an option when adding items such as sugar and milk, if the
machine allows for this.
2.7.2 Selecting jug function
If the jug function is switched on the cup sensor is
switched off.
The jug function allows you to select more than one cup at once. This
button operates with all available drinks. The procedure for selecting
more than one cup is described below.
1. Push the cup stand up and put a jug under the dispensing nozzle.
2. Use the
jug function
button and press the desired selection button
several times.
3. Now operate the
MILK
and/or
SUGAR
buttons to obtain the
required combination.
4. Press the
START
selection button for the required drink. The jug is
filled. Ensure that the jug is large enough for the number of cups
selected.
To reduce the number of cups while the machine is dispensing, press
the
jug function
button several times until the required number
appears. The machine will stop after the current cup is dispensed.
If the machine is equipped with a coin mechanism and key switch for
the jug function, the free dispensing mode is activated by inserting the
key in the lock (switch) and turning it to the right.
2.7.3 Stand by
Stand by mode is indicated by the following:
•
The buttons are not illuminated.
•
The illumination panel or photo frame (optional) is on.
•
The Shift button flashes green.
Press any button to bring the machine out of stand by.