8
© ETNA Coffee Equipment b.v.
Instruction for use MUNDO
C O F F E E T E C H N O L O G I E S
4
SAFETY INSTRUCTIONS
The MUNDO meets all the requirements associated with the CE
mark.
The following symbols are used in these instructions:
Ꮨ
This means: take care, danger of damage to the machine
This means: take care, you are taking a risk
☞
This means: important information
➭
This means: tip
The following safety instructions should be observed during
maintenance operations on the machine. Neither the manufacturer nor
the supplier will be liable for injury occurring as a result of irresponsible
actions.
•
Only qualified staff may remove protection plates installed in the
machine.
•
Never work on the machine while someone else is using it.
•
Never use the machine without water in the boiler.
•
Dismantling or modifications to the machine may only be carried out
by qualified staff.
•
Modifications to the equipment are subject to written authorisation
from ETNA Coffee Equipment b.v. .
•
Connect the machine to the water supply in accordance with local
regulations.
•
Connect the mains cable to an earthed wall socket.
•
Never attempt to clean the machine with a water jet, or to use it in
an area where hoses are used.
•
If the connection has to be relocated, contact your supplier's service
department.
5
PREPARING THE MACHINE FOR USE
Before the MUNDO is ready for use, some activities have to be
performed. These activities must be carried out by qualified personnel.
However, they are still included in this manual and the various stages in
the installation procedure are explained below.
The machine must first be set up in a suitable location
(see paragraph
5.1)
and the packaging removed
(see paragraph 5.2)
. The machine
should then be connected to the mains and water supply
(see
paragraph 5.3)
. The containers should then be filled
(see paragraph
5.4)
. Once the boiler has been drained and refilled, the machine is
ready for use
(see paragraph 5.5)
.