Instruction for use MUNDO
13
© ETNA Coffee Equipment b.v.
C O F F E E T E C H N O L O G I E S
7.2.1 Cleaning mixer parts
The following parts must be cleaned during the weekly maintenance:
•
Extraction hoods
•
Mixing chambers
•
Hoses
•
Suction filter
1. Open the door of the machine.
2. Switch the machine off at the on/off switch.
3. Take the hoses out of the mixing chambers.
4. Take the hoses out of the dispensing pipes.
5. Take the dispensing pipes out of the steam trap.
6. Release the mixing chamber by pulling the green catch below it
forwards.
7. Take the mixing chamber out of the machine by carefully pulling the
bottom of the chamber towards you.
8. Take the suction filter out of the machine.
9. Clean all parts in hot water and dry them carefully.
10.Clean the inside and outside of the machine with a damp cloth.
11.Fit the cleaned parts and connect the hoses.
12.Switch the machine on at the on/off switch.
13.Rinse the mixers by pressing buttons 1 and 2 on the service panel
on the inside of the door. Check that there are no leaks!
14.Close the door.
☞
The mixing chamber must latch securely in place to
prevent leaks. Ensure that the green catch snaps back
into place.
Figure 7-1
1
2
3