ETNA KI680ZT, Инструкция по эксплуатации

Страница: 44 / 108

EN 18
4. Within 10 seconds select a cooking time with the ‘-’ or ‘+’ timer key.
▷
The point from the relevant cooking zone next to the timer display is flashing.
5. The timer has been set.
▷
The cooking zone will switch off after the set time has passed.
▷
The timer alarm beeps after the set time has passed.
▷
Touch any key to stop the alarm; alternatively the alarm will switch off automatically after
2 minutes (the duration time of the alarm can be adjusted; see ‘Settings’).
Changing preset cooking time
Cooking time can be changed anytime during the operation.
1. Touch the timer key as many times as necessary, to select the zone of which you want to
adjust the timer.
▷
The zone is identified by a flashing point next to the timer display.
2. Touch the ‘-’ or ‘+’ timer key to change the time.
Checking remaining cooking time
The timer display shows all timer settings. The different timer settings are shown clockwise in the
display in turn.
1. Touch the timer key as many times as necessary, to select the zone of which you want to
see the remaining time.
▷
The zone is identified by a flashing point next to the timer display.
▷
The timer will display the remaining time of the selected cooking zone.
Turning the timer off
If you want to switch off the timer prior the end of preset time:
1. Touch the timer key as many times as necessary, to select the zone of which you want to
disable the timer.
OPERATION