ETNA KI680ZT, Инструкция по эксплуатации

Страница: 41 / 108

EN 15
Start cooking
Use of the touch keys
Put the tip of your finger flat on the touch key. Do not apply pressure.
The touch keys react to a light fingertip touch. Only operate the touch keys with your finger.
The touch key gives a short audio signal when it engages.
1. Touch and hold the On/Off key until you hear an audio signal.
▷
The On/Off Indicator light appears.
▷
All displays show ‘0’ indicating that the induction hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone.
▷
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
• Touch the ‘+’ or ‘-’ key of the desired cooking zone.
▷
Touching the ‘+’ key for the first time displays setting ‘9’.
▷
Touching the ‘-’ key for the first time displays setting ‘4’.
▷
A short audio signal will sound.
▷
The power level indicator is flashing.
When the pan detection symbol flashes:
• you have not placed a pan on the correct cooking zone;
• the pan you’re using is not suitable for induction cooking;
• the pan is too small or not properly centered on the cooking zone.
▷
No heating takes place unless there is a suitable pan on the cooking zone.
▷
The display will automatically turn Off after 2 minutes if no suitable pan is placed on it.
If the hob is not used for 10 seconds, it will shut off automatically.
OPERATION