ETNA FG890RVS, Инструкция по эксплуатации

Страница: 50 / 64

EN 20
• Varnished, stainless steel, and galvanised surfaces, and aluminium
parts must never come into contact with oven sprays, because this
will damage and discolour them. The same applies to the thermostat
sensor (if the device is equipped with a timer with a sensor), and to
the heating elements that are accessible at the top.
• When purchasing and using cleaning agents, be sure to take account
of the environment and heed the instructions of their manufacturer.
Practical tips
• It is recommended to wrap large pieces of fatty meat in aluminium
foil or put them in a suitable roasting bag to prevent grease from
splashing on the oven walls.
• Put a drip tray under the meat when grilling.
Accessories
Wash any accessories (baking trays, grids, etc.) with warm water and
standard washing-up liquid.
Special enamel coating
The oven, the inside of the door and the baking trays have been treated
with special enamel, which has a smooth and strong surface. This
special coating makes cleaning at room temperature easier.
Removing the oven door
To clean the inside of the oven it is possible to remove the oven door.
1. Open the oven door fully and turn the pawls back as far
as they will go.
MAINTENANCE