ETNA FG890 Series, Инструкция по эксплуатации

Страница: 40 / 60

EN 12
OPERATING THE OVEN
Operating the oven with the timer
The timer can be used in different ways:
• You can set the end time of your baking/roasting/grilling. The oven
starts immediately. As soon as the set time has elapsed, the oven
will switch off automatically and an alarm will sound.
• You can also use the timer to enter a start or end time
(for an automatic baking process). The oven will start and stop
automatically. As soon as the automatic baking process has ended,
the oven will switch off automatically and an alarm will sound.
• The timer can also be used as a kitchen timer. The kitchen timer will
not switch off the oven.
Programming the end time
1. Press the setting dial twice.
The ‘stop’ indicator lamp will flash.
2. Turn the setting dial right or left to set the end time.
3. Press the setting dial again.
The end time has been set; the ‘stop’ indicator lamp lights up.
4. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature indicator
light will light up; the oven is switched on.
▷ When the set time has elapsed, the alarm will sound and the
indicator lamp will flash. Press the setting dial to switch off the
alarm and indicator lamp.
▷ If you don’t do anything, the alarm will switch off automatically
after 1 minute. The indicator lamp will stay flashing until you
have pressed the setting dial.
5. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to also switch off the oven indicator lights.