ETNA FG890 Series, Инструкция по эксплуатации

Страница: 38 / 60

EN 10
Setting the clock
The correct current time of day needs to be set when connecting the
unit for the first time. The clock indicator lamp flashes.
1. Press the timer setting dial once.
The clock indicator lamp goes out.
2. Now press the setting dial four times.
The clock indicator lamp flashes again.
3. Turn the setting dial right or left to set the hands to the correct position.
4. Press the setting dial again.
The current time has been set; the indicator lamp will go out.
▷ If you don’t press the setting dial after setting the time, the indicator
lamp will go out automatically after 10 seconds.
Operating the oven
1. Set the oven to ‘manual operation’.
▷ If no indicator lamp is on, the oven is set to manual operation.
If a lamp is on, you first need to cancel the programming.
You can cancel a set programme by pressing the setting dial for
a few seconds until the indicator lamps concerned go out and
you hear a second audible signal.
2. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature indicator
light will light up; the oven is switched on.
▷ See the ‘oven functions’ table for more information on the various
oven functions that are available.
3. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to switch the oven off.
Please note: If the oven doesn’t work, it is possible that the timer is
programmed. Cancel the programme by pressing the timer switch
setting dial for a few seconds! The indicator lamp goes out and an
audible signal sounds.
OPERATING THE OVEN
°C
70
100
120
150
180
210
230
250