![ETNA EVW7962 Скачать руководство пользователя страница 39](http://html1.mh-extra.com/html/etna/evw7962/evw7962_instructions-for-use-manual_2433343039.webp)
GB 11
Attention!
A cycle that has already begun can only be changed in the start-up
phase. After this, the detergent will be sprayed all over the dishes or
the machine may have already pumped out the water. In that instance,
you must refill the detergent compartment (see section on Dishwasher
detergent).
Warning!
It is dangerous to open the door completely when washing, because the hot
water may scald you.
At the end of the wash cycle
Once the wash cycle has completed, an audible signal will sound for
eight seconds.
1. Switch the appliance off using the On/Off button.
2. Open the door.
3. Wait a few minutes before unloading the dishwasher. The dishes
and cutlery will still be very hot immediately following the end of the
cycle. There is a chance that dishes may break as a result of the
heat. Moreover, the dishes dry better when allowed to stand for a
few minutes.
Cycle selection table
Cycles EVW7947
Information
Cycle process
Time in min.
Eco
(EN50242)
Standard daily cycle for normally soiled
loads, such as plates, glasses and
lightly soiled pans.
Pre-wash
Wash (50 °C)
Rinse (65 °C)
Drying
160/165
Rapid
A shorter wash for lightly soiled loads
that do no need drying.
Wash (40 °C)
Rinse
Rinse (40 °C)
30
Rinse
To rinse dishes that you plan to wash
later that day.
Pre-wash
8
OPERATION