ETNA EFE509WIT, Инструкция по эксплуатации

Страница: 27 / 32

EN 13
MAINTENANCE
Installation
General
The fitting of the appliance should only be
carried out by a registered installer.
Electrical connection 230 V - 50 Hz.
 
The electrical connection must comply
with national and local regulations. For the
Netherlands this includes the NEN 1010
amongst other standards.

Perilex Wall socket and plug must be
accessible at all time.
3 phase connection (3 1N a.c. 400V / 50Hz)

This appliance is standard suitable for
connected to a 3-phase mains (3x phase,
1 neutral). The voltage between the live-
wire and the neutral wire is 230V. The
voltage between live-wires is 400V. The
appliance does not have to be adjusted for
this connection.
2 phase connection (2 2N a.c. 230V / 50Hz)

This appliance can also be connected to
a 2-phase mains (2x phase, 2x neutral).
The voltage between the live-wire and the
neutral wire is 230V. The voltage between
live-wires is 0V.
Caution! When connecting to a 2 phase mains
socket (perilex) the electrical connection of
the appliance has to be adjusted. See wiring
diagram.

The appliance should always be earthed.
Use good quality cable for connecting e.g.
H05RRF, 1,5 mm², with 5 cores.

The cable must have a plug suitable for a
nominal load of at least 15 A. If you want to
make a fixed connection ensure that a multi-
pole switch with a distance between contacts
of 3 mm is installed in the supply cable.
Wiring diagrams

There is a label showing the wiring
diagrams on the back of the appliance.
Dimensions
850
500 600
front view side view
3 phase connection
2 phase connection