Appendix F. User Manual
ETL Inc.
#584 Sangwhal-ri, Kanam -myon,
Yoju-kun, Kyounggi-do,
469-885, Korea 58 of 83
FCC ID : PFMTC7530
Report No:E03.0820.FCC.444N
Issue of Date: August 20, 2003
GEMPACK CO., LTD.
15” Web Base Terminal
Model: TC7530
5. Operation
Operating the TeleCLIENT TC7530 includes using the
TeleCLIENT Connection
Manager
to set up network connections, and the hot key combinations to switch
between active sessions. This chapter explains how to use the
TeleCLIENT
Connection Manager
and operation hot keys.
It includes the following sections:
•
Powering On
•
Using the
TeleCLIENT Connection Manager
•
Connecting to a Network Server
•
Using the TeleCLIENT TC7530 Hot keys
•
Logging Off
5.1. Powering On
The TeleCLIENT TC7530 Windows-based terminal is powered by an AC to DC adapter,
which connects to the rear panel DC-in jack. Notice the
ON/OFF
switch located on the
front panel (refer to Hardware Installation). Use this switch to power the TeleCLIENT
TC7530 on and off.
To power-off the TeleCLIENT TC7530, press the ON/OFF switch. To re-start, press the
ON/OFF switch briefly.
WARNING:
FOLLOW THE INSTRUCTIONS ABOVE CAREFULLY TO AVOID
ACCIDENTAL POWER SHUT-OFF TO THE TELECLIENT TC7530.
5.2. Using the TeleCLIENT Connection Manager
The
TeleCLIENT Connection Manager
allows a user to create and manage
TeleCLIENT TC7530’s network connections. Whenever the TeleCLIENT TC7530 starts
up, the
TeleCLIENT Connection Manager
window automatically displays (
Figure 5.1
)
unless it is an initial start up or ‘
auto-start connection’
was set by a user. This window
will also appear whenever user logs off or disconnect from a session.