SAFETY INSTRUCTIONS AND REGULATORY NOTICES
7
6
Safety Instructions and Regulatory Notices
BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ THESE INSTRUCTIONS
!
When using this product, always follow the basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the
following:
<
Always install the product as described in the documentation that is included with your product.
<
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
<
Do not use this product to report a gas leak in the vicinity of the leak.
Product Use
You must install and use this device in strict accordance with the manufacturer’s instructions as described in the user documentation that is included
with your product.
Before you start installation or use of this product, carefully read the contents of this document for device specific constraints or rules that may apply in
the country where you want to use this product.
Any change or modification made to this product that is not expressly approved by Technicolor will result in the loss of product warranty and may
void the user’s authority to operate this equipment. Technicolor disclaims all responsibility in the event of use that does not comply with the present
instructions.
In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the
organization. If you are uncertain of the policy that applies on the use of wireless equipment in a specific organization or environment (e.g. airports), you
are encouraged to ask for authorization to use this device prior to turning on the equipment. Technicolor is not responsible for any radio or television
interference caused by unauthorized modification of the device, or the substitution or attachment of connecting cables and equipment other than
specified by Technicolor. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of
the user.
Technicolor and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to
comply with these guidelines.
Open Source Software notification
The software of this product may contain certain open source software modules which are subject to Open Source Software license terms (see
https://opensource.org/osd for definition). Such Open Source Software components and/or versions may change in the future versions of the software
product.
A list of the Open Source Software used or provided as embedded into the current software of the product and their corresponding licenses and version
number are, to the extent required by applicable terms, available on Technicolor’s website at the following address: www.technicolor.com/opensource or
at another address as Technicolor may provide from time to time.
If and where applicable, depending on the terms of the applicable Open Source Software licenses, the source code of the Open Source Software is
available for free upon request.
For avoidance of doubt, Open Source Software is only licensed by the original owner of the Open Source Software under the terms set forth in the
designated Open Source License.
Safety Instructions
Climatic conditions
This product:
<
Is intended for in-house stationary desktop use; the maximum ambient temperature may not exceed 40°C (104°F).
<
Must not be mounted in a location exposed to direct or excessive solar and/or heat radiation.
<
Must not be exposed to heat trap conditions and must not be subjected to water or condensation.
<
Must be installed in a Pollution Degree 2 environment (Environment where there is no pollution or only dry, nonconductive pollution).
Cleaning
Unplug this product from the wall socket and computer before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Water and moisture
Do not use this product near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.
Transition of the product from a cold environment to a hot one may cause condensation on some of its internal parts. Allow it to dry by itself before
re-starting the product.
Interface classifications
The external interfaces on the rear panel of the product are classified as follows:
<
DSL: TNV circuit, subjected to over voltages (TNV-3)
<
Phone, FXS: TNV circuit, not subjected to over voltages (TNV-2)
<
All other interface ports (e.g. Ethernet, 10/100Base-T/MDI(-X), USB, Console, etc.), including the low voltage power input from the AC mains power
supply: SELV circuits.
Electrical powering
The powering of the product must adhere to the power specifications indicated on the marking labels.
The power supply must be Class II and a Limited Power Source in accordance with the requirements of IEC 60950-1/ EN 60950-1, Clause 2.5, or
IEC 62368-1/EN 62368-1, Annex Q and rated as indicated on the label on your product. It must be tested and approved to national or local standards.
The use of other types of supplies is prohibited. If you are not sure of the type of power supply needed, consult the product’s user documentation or
contact your local product dealer.
Содержание DGA4231ETI
