Etic Telecom RFM-E-400, Руководство пользователя

Страница: 16 / 18

INSTALLATION
Page 16
DOC_DEV_RFM_User Guide_A
1.4 Connectors
Connecteur RJ45 Ethernet
Pin Signal Fonction RJ45
1 Tx + Emission po
2 Tx - Emission polarity -
3 Rx + Reception po
4 N.C -
5 N.C -
6 Rx - Reception polarity -
7 N.C. -
8 N.C. -
1.5 Push Button (PB)
Push button of the front face B1
PB push
Indicator
Feature
10 secondes 5 pulses ETIC TELECOM hotline is authorized to establish a remote
connection to the RFM within 1 hour.
1.6 Indicators
LED
According to models
Features Indicator Description
Opération
Off Power Off
Steady green In function
Slow flashing green Busy
Steady Red Start up (30s) - Otherwise serious hardware or software fault or
missing SIM card or missing recording media
Fast flashing Red Firmware loading in progress
Alarm
application
Reserved
M2Me
Connection M2Me
Off Not connected to M2Me_Connect service
Slow flashing 2s Connection in process
Steady Green Connected
WAN
Ethernet Left light
Off Not connected or interface disabled
Green Connected / light flash when data is present
LAN Ethernet
x 4
Left light
Off Not connected or interface disabled
Green Connected / light flash when data is present
Rear face push Button B2
PB push
Indicator
Feature
During operation Blinking red Temporary return to the Factory configuration.
(IP address : 192.168.0.128)
Current configuration is kept.
Simultaneously with
power on Blinking red Permanent return to Factory configuration.
Current configuration is lost unless it has been saved to a file.