Etic Telecom RFM-E-400, Руководство пользователя

Страница: 11 / 18

PRESENTATION
DOC_DEV_RFM_User Guide_A
Page 11
4 Product presentation
4.1 Application
The RFM-E-400 simplifies the management of your fleet of RAS Machine Access Boxes by automating the
update of remote sites maintained and by centralizing in the RFM the management of access rights for each
operator.
The RFM-E-400 is an option of the M2Me remote maintenance solution which allows faster and safer
management of a fleet of RAS. The RFM mainly targets medium/large fleets of RAS.
NOTE: the interconnection of an RFM on a existing fleet of RAS, presupposes a significant charging time. This
load time includes the creation ex nihilo in the RFM of all remote maintainer users as well as the ex nihilo creation
in the RFM of all remote sites to be maintained.
The RFM is configured using a PC equipped with a web browser. No additional software is required. For
security reasons, access rights will be defined for the RFM.
The RFM is an industrial router on which is installed a management system for a fleet of routers. It therefore
has an HTML interface for configuring the network part identical to that of our range of routers as well as a
very simple configuration interface dedicated to fleet management.
NOTE: The detailed configuration of the RFM is described in a separate document available on our WEB site or
from the hotline service ( hotline@etictelecom.com )
4.2 Main features
Management of the peering of remote sites to the RFM according to two cases:
•
1
st
case: The fleet of RAS already exists:
A remote site database must be created in the RFM. Each site equipped with a RAS is attached to the RFM by
entering the RAS Product Key (PK) in the RFM (see RAS user manual) and a user ID of a remote maintainer. (If
the RAS is protected, you will also need to enter the administrator's password).
NOTE: in this specific case, it is advisable to call the Etic Telecom hotline service for a quicker start.
•
2 nd case: This is a new RAS in the fleet (recommended case).
This new RAS must be added to the RFM database.
When installing the RAS, you will need to fill in the "administration rights" section as follows: