5
www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
3
Connecting the electrical wires
□
Remove the driver cover to access the wiring and push connectors.
□
Insert the live black wire from the electrical outlet box into the push connector
opening labeled “ACL” in the driver box on the back of the LED flat panel (A).
□
Insert the neutral white wire from the electrical outlet box into the push connector
opening labeled “ACN” in the driver box on the back of the LED flat panel (A).
□
Connect the ground wire from the electrical outlet box to the yellow wire in the driver
box on the back of the LED flat panel (A).
□
If a 0-10v dimming circuit is available, insert the purple wire from the electrical outlet
box into the push connector labeled “DIM+” and the gray wire from the electrical
outlet box into the push connector labeled “DIM-” in the driver box on the back of the
LED flat panel (A).
□
Replace the driver cover once wiring connections are complete, fully tightening the
screw to hold it securely in place.
CAUTION:
Do not allow the DIM+/- and LED +/- wires to make contact as it will cause
damage to the LED Driver.
4
Restoring power
□
Restore power at the electrical panel.
□
Turn on the light switch to activate the fixture.
Grid Ceiling Installation (continued)
LED Driver
Red
White
White
Black
Gray
Purple
Gr
een
Yellow
Dim-
Dim+
LED-
LED+
ACL
ACL
ACN
ACN
