background image

 

5 ETiSSL.com

 

 

Please contact 1-855-384-7754 for further assistance.

installation

Attaching the mounting bracket to 

the electrical box

 

Attach the mounting bracket (FF) to the electrical 
box using the two short mounting screws (BB). The 
stamped word “GND” faces away from the electrical 
box during the installation.

Attaching the 

foam gasket to the 

electrical box

 

Position the foam gasket 
(GG) between the electrical 
box and the back of the light 
fixture base (B) to create a 
weathertight seal.

 

Pull the wires from the 
electrical box through one of 
the two openings in the foam 
gasket (GG).

Making the electrical 

connections

 

Connect the hot and neutral (black and white) 
wires from the light fixture base (B) to the same 
color wires from the electrical box. 

 

Connect the ground wire from the light fixture 
base (B) to the ground wire from the electrical 
box, then attach the ground wire to the 
grounding screw (CC) on the mounting bracket 
(GG).

 

Cover the wire connections using the wire 
connectors (EE).

GG

B

EE

CC

BB

FF

GG

FF

FF

B

GG

WarninG:

 RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off 

the circuit breaker before removing the existing light fixture or installing the new one.

With power disconnected to the electrical box, remove the existing fixture. Make a sketch of how the current 
fixture is wired (by wire color) or mark the wires with masking tape and a pencil so you will know how to properly 
reconnect the wires to the new LED light fixture.

Содержание 51402241













Отзывы: