troubleshooting
warninG:
Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem
Possible Cause
Solution
The fixture will not light.
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the on position.
There is a defective switch.
Contact a qualified electrician.
The power cord is loose.
Remove the power cord from the outlet. Ensure
the power cord is firmly inserted into the
GrowElite
TM
light fixture and then plug the other
end of the power cord back into the outlet.
If using the GrowElite
TM
Remote Control,
the grow light is not connected to the
remote control.
Review the troubleshooting section of the
GrowElite
TM
Remote Control Instruction Manual -
model number 90600366.
The fuse blows or the circuit breaker
trips when the light is turned on.
The power cord is grounding out.
Contact a qualified electrician or call customer
service 1-855-384-7754.
The timer does not turn the grow light on
and off.
If using the timer on the GrowElite
TM
Grow Light, the fixture needs to be
reset.
Turn the GrowElite
TM
light fixture off. Make sure the
Spectrum Switch is on Flower or Veg and then turn
the light back on. Turn timer dial to 2 hrs to test if
the light stays on for the 120 minutes.
Contact ETi Solid State Lighting customer service
at 1-855-384-7754 for further assistance.
If using the GrowElite
TM
Remote Control,
the Grow Light settings are not correct.
Make sure the Spectrum Switch is set to Remote
Control.
Review the troubleshooting section of the
GrowElite
TM
Remote Control Instruction Manual -
model number 90600366.
Questions, problems, missing parts?
Call ETiSSL Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-855-ETI-SSLI (1-855-384-7754)
www.ETiSSL.com
Retain this manual for future use.
