EtherWAN EX42200, Быстрый старт

Страница: 5 / 21

EX42200 www.etherwan.com
5
Functional Description
 Meets EN61000-6-2 & EN61000-6-4 EMC Generic
Standard Immunity for industrial environment.
 Supports IEEE802.3at Power over Ethernet (PoE)
Power Sourcing Equipment (PSE).
 Port 1 to 4 support PoE function, IEEE802.3at Power
over Ethernet (PoE) and 10/100Base-TX.

Up to 30W per PoE port, 55VDC, 600mA Max.
 Supports IEEE802.3/802.3u/802.3x. 10/100Mbps,
Full/Half-duplex, Auto-Negotiation, Auto MDI/MDIX.

100Base-FX: Multi/Single mode SC or ST type.
100Base-BX: WDM Multi/Single mode SC type.
 Supports 2048 MAC addresses. Provides 448K bits
buffer memory.
 Alarms for power failure by relay output. Fully supports
normal open and normal close.
 Redundant dual 18 to 57VDC Terminal Block power
inputs.
 Device power consumption: 14W Max. (without PoE).
PoE power budget: 120W Max.
 Operating temperature ranges from -40
℃
to 75
℃
(-40
℉
to 167
℉
), tested for functional operation @ -40
℃
to 85
℃
(-40
℉
to 185
℉
).
 Supports DIN-Rail installation.
Assembly, Startup, and Dismantling
 Assembly: Place the switch on the DIN rail from above
using the slot. Push the front of the switch toward the
mounting surface until it audibly snaps into place.
 Startup: Connect the supply voltage to start up the
switch via the terminal block.
 Dismantling: Pull out the lower edge and then remove
the switch from the DIN rail.