7
TECHNICAL SERVICES PHONE:
0800 145 6033
Promat
| How to Line a masonry fireplace
Stage 2
Installing
PROMAFOUR® (continued)
The rear PROMAFOUR® board is held in place
using Flamebond 9 as a bonding compound.
Check to ensure it is level and the surface is even.
When screw fixing into the the masonry you
would need to use a suitable metal wall plug
and countersunk wood screw.
TIP
As is common with older properties some
of the walls might be uneven – if this is the
case you could use a PROMAFOUR® wedge as
shown opposite to pack out behind the board to
overcome any unevenness on their side.
Now apply the PROMAFOUR® pieces you have
measured for the left and right of the fire place in
the same way as rear board but you do not need
to use compound to hold into place.
TIP
If you have uneven walls that the board
needs to be corrected for, you can use a hand
saw to ‘shave’ the board to ensure a good fit.
Checking the board is level.
4
Using a PROMAFOUR® wedge to correct uneven walls.
Fixing the left and right pieces.
5
‘Shaving’ PROMAFOUR® with a hand saw to ensure a good fit.
