Etesia NECTS Скачать руководство пользователя страница 15

15

8• MAINTENANCE

IMPORTANT ! 

Regularly check the correct adjustment of the 

drive clutch cable. 

Checking and adjusting the tension:

L0 =  length of the spring at rest 
L1 = length of the spring when the corresponding control is 

activated

The tension applied to the spring connecting the cable to the control 

levers (value L1-L0) must be maintained, in gear and with the engine 

off, at a value of between 4 and 5 mm.
Any adjustments that are needed can be made by moving the screw 

thrust bearings on the tightening screws on the sheathing on the left-

hand sleeve of the handlebar.
• Loosen the lock-nuts, unscrew the thrust bearings by the necessary 

value, then tighten the lock-nuts again and check.

While the control lever is not being used, the spring should not exert 

any tension on the cable.

TRANSPORT

If the machine has to be raised or transported, turn off 

the motor. Allow it to cool for at least 15 minutes before 

loading the mower into a vehicle. 

It is advisable to use a loading ramp or to have somebody help you 

load and unload the mower.

QUICK HANDLE FOLDING (PICTURE 19)

To reduce the mower space requirement in order to make storage 

easier, the handle has to be folded.
• Remove the grass collector.

• Loosen the middle fastening nuts on the handlebar as far as the 

screw collar, and allow the upper part of the handlebar to fold 

backwards. 

• Loosen the lower mounting nuts on the handlebar, move the lower 

parts of the handlebar outwards at their lower mounting points to 

release the positioning lugs and to be able to raise them.

• Fold the lower parts of the handlebar forward on your lawnmower 

and rest the upper part of the handlebar on top of them, taking care 

not to damage the cables.

9• WINTER STORAGE - LONG STOP

• Carefully clean the machine and in particular the underneath of the 

cutter housing. 

• Store the mower in a clean, dry place, on planks or a sheet of metal. 

Содержание NECTS





















Отзывы: