8
Initial Assembly & Inspection
Inspect the crate and crate contents to ensure no damage occurred during
shipping.
1
2
3
4
5
6
i
ii
iii
iv
v
vi
vii
Carefully remove M9 Sorter from crate.
Insert hopper Pins into Adjustment Blocks to lock hopper in position. The
blocks are mounted on the opposite side of their intended position for
shipping purposes.
Attach Shelf on the outfeed side of the Sorter by inserting holes on shelf onto
pins and pushing down on shelf to wedge in place.
Attach Slide-Outs by hooking them onto the edge of the Slide Out Table. This
will allow Slide-Outs to be adjustable.
Once initial assembly is complete, inspect the M9 Sorter to confirm that it is
ready to operate:
Confirm the power cord is in good condition.
Ensure the sorter belts are placed properly within pulley grooves.
Ensure rear tailgate is properly closed.
Ensure casters are in the locked position.
Attach Slide-Outs to desired distance for sorting into totes.
Ensure polycarbonate end covers are in place and safety sensors activated.
Place a tote under Slide-Outs and on the outfeed shelf to collect sorted
material.
I N I T I A L
SETUP
