1 . 8 6 6 . 8 7 4 . 6 2 4 4 | I N F O @ M O B I U S T R I M M E R . C O M | M O B I U S T R I M M E R . C O M
CLEANING &
MAINTENANCE
M9 Sorter is washdown rated - to clean the Sorter as follows:
Preventative Maintenance
Engage the E-Stop and disconnect the power cord.
Eteros recommends that the pulleys and belts be cleaned off regularly to
avoid buildup of resin on these parts. This cleaning process should take place
at the end of each session or more frequently, depending on the operating
environment and condition of material being processed.
1
1
2
2
3
4
5
6
Remove both end plate polycarbonate covers.
Eteros recommends cleaning the inside of the machine on a regular basis.
Open tailgates.
Using warm or hot water (maximum 55oC/130oF), rinse down the interior of
the machine, pulleys, belts, Slide-Outs, etc. The belt and pulley assemblies
can also be removed for a more thorough cleaning process.
Spritz body (interior and exterior) and any removed parts with degreaser,
allowing time for the degreaser to sit on surfaces and penetrate any soils.
Use a cloth to remove any stubborn soils. Rinse thoroughly (pressure washer
ok) with warm or hot water (maximum 55oC/130oF) and allow to dry. Apply a
sanitizer if necessary as part of your sanitation SOP.
Reinstall the pulley assemblies (if removed), belts (if removed), Slide-Outs (if
removed) and the Polycarbonate Covers.
