background image

Carefully read this manual in all its parts upon receipt of Eternity Technologies OPzV Standby & Solar Batteries. Please refer to 
the latest edition of the battery room standards, effective at the moment of installation IEC 62485-2. 

Lead-acid Standby & Solar Batteries are components of a system and although they are maintenance free, they require suitable precautions and 
behavioural norms to guarantee safe working conditions and to ensure maximum performance of the battery during its entire life. The Installation, Operation 
and Maintenance instruction manual supplies the necessary instructions for the correct care, handling, installation, use and maintenance of Eternity 
Technologies OPzV Standby & Solar Batteries.

The non compliance with the instructions given herein may cause injury to personnel and damage to equipment as well as poor operation and performance 
of the battery. Any repairs made without authorisation, for example, opening the valves, may render the warranty void.

Store this manual in close proximity to the batteries at all times and ensure it is accessible to the relevant personnel.

O

bserve the following precautions at all times

Observe the operating instructions - work on the battery should be 
carried out by qualified personnel only.

Exposed metal parts of the battery carry a voltage and are electrically 
live with the risk of short circuits.

Avoid any electrostatic charge; before starting work on the battery, 
first discharge any possible electricity from yourself by touching an 
earth-connected part; repeat this action occasionally until work is 
complete.

Use protective equipment, such as protective clothing, rubber gloves 
and goggles.

OPzV Standby and Solar I&O&M

1.  

Safety Instructions

2. Introduction
3. 

Delivery, Unpacking and storage

4. Installation
5. Charging
6. Discharge
7. 

Temperature & Air Flow

8. 

Cycle Life

9. 

Hybrid Applications

10. 

Solar Applications

11. Maintenance

1. Safety Instructions 

No naked flames

Corrosive

Wear safety goggles

Read instructions

Keep away from children

Explosive

Caution

Electric shock risk

First aid /

medical assistance 

Use insulated tools.

DO NOT place or drop metal objects on top of the battery.

DO NOT wear rings or bracelets.

Remove any articles of clothing with metal parts that might come into 
contact with the battery terminals.

DO NOT smoke and DO NOT use open flames or create electric 
sparks.

Take all precaution when using the main supply.

Содержание OPzV Series









Отзывы: