Model:
VECOEM3M
Economy LED Maintained Emergency Bulkhead
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
BATTERY REPLACEMENT:
If after routine operation check, the lamp does not
remain lit for the three hour period, a new battery
pack may be required.
01) Switch off the electricity at the mains, both
switched and permanent supply.
02) Allow batteries to fully discharge then reconnect
to supply and allow to charge for 24 hours.
03) Test again for 3 hours, if light does not remain lit
change the battery pack as follows:
04) Disconnect from the mains supply - both
permanent and switched supply and then
remove the diffuser.
05) Press the two tabs and open the gear tray.
06) Unplug the battery lead from the circuit board.
07) Remove the battery pack and lift the battery
pack out of the fitting.
08) Write current date on the new battery pack.
09) Fit new battery pack and secure in place.
10) Plug battery pack into circuit board.
11) Close and secure gear tray
12) Replace diffuser.
13) Restore power and allow to charge for 24 hours.
14) Perform full operation check and update test
record.
REPLACEMENT BATTERY TYPE:
3.6V Ni-Cad, 3 x C cells 1500mAh
CLEANING:
Clean this light fitting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
INDUSTRIAL BATTERIES:
Within certain products Eterna Lighting Ltd places
lead acid, lithium ion, nickel cadmium & nickel
metal hydride batteries on the market. Industrial
batteries are subject to waste regulation under
the Waste Batteries and Accumulators Regulations
2009 and should be disposed of responsibly.
Purchasers may be able to dispose of their waste
industrial batteries locally via legitimate licensed
trade waste contractors. Eterna is obliged to take
back, free of charge and within a reasonable time,
waste industrial batteries of the same chemistry
supplied to a Purchaser, for treatment and recycling
and is required to do this in any calendar year new
industrial batteries are placed on the market. In
certain circumstances, this may include batteries
not originally supplied by Eterna. If any Purchaser
requires Eterna to take back Industrial batteries,
they should write to the Operations Director, Eterna
Lighting Ltd, Huxley Close, NN8 6AB, who will then
advise on the necessary arrangements for the
receipt, proper treatment and recycling of, the waste
industrial batteries.
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
3 HOURS DURATION IN EMERGENCY MODE
DANGER!
Please note that there are two live supplies, one switched and one permanent; please ensure you
isolate both before you undertake any work on the emergency fitting.
Pack contents:
1 x LED ftting
1 x Maintenance check record
Legend set available:
VECOEMISOL
Email: [email protected] / [email protected]
Visit our website:
www.eterna-lighting.co.uk
Made in China
Issue 0917
