background image

If your alarm is defective or develops a fault, please return it to the place where you bought it. You can call our 
Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not 
be able to give specific instructions regarding individual installations. 

If in doubt, consult a qualified electrician.  

 

 

Help Line

 

Tel:  01933 673 144               
Fax: 01933 678 083              
Email: [email protected]  
For all other information visit our website www.eterna-lighting.co.uk

Eventually, you may want to replace this smoke alarm:

 

 

When your alarm comes to the end of its life or you choose to update or upgrade it by replacing it, please do not 
dispose of it with your normal household waste, please recycle where facilities exist. When you need to dispose 
of this alarm, check with your retailer or local authority for suitable options. New regulations require the recycling 
of Waste from Electrical and Electronic Equipment (European “WEEE Directive” effective August 2005—UK WEEE 
Regulations effective 2nd January 2007). Environment Agency Registered Producer: WEE/GA0248QZ

                       

Battery Replacement

1.  Switch off the electricity at the mains.

2.   Remove the locking tabs from the side of the 

alarm, twist the Alarm anti clockwise and pull 

away from the base.

3.  Remove the power connector.

4.  Remove and replace the battery.

5.  Replace the power connector.

6.   Fit the alarm back onto the base and twist 

clockwise, refit the locking tabs.

7.  Restore the power at the mains.

8.   Check the alarm is functioning by pushing the test 

button.

Specifications

Power Source:

   

220-240Vac~ 50-60Hz with  

 

9V battery back-up

Battery Back-Up:

 

 9Vdc Alkaline or Carbon Zinc 

battery: EVER READY PP3S 

DURACELL MN1604 9V

Battery Back-Up Life:

     In the event of a break in the 

mains supply the battery will 

give detector operation for 1 

year minimum

Operating Current:

 

 <20mA operation (in alarm), 

15µA in standby mode

Sensitivity to Smoke:

   3.0-6.0% per metre    

 

 

obscuration

Operating Temperature:

 5°C - 45°C

Ambient Humidity:

 

10% - 90%

Alarm Sound Level:

 

85 Decibels at 3 metres

Interconnect Facility:

 

40 smoke detectors

Hush Facility:

   Mutes alarm for 10 minutes, if smoke 

density increases during this time the 

alarm will be re-triggered.

Approval:

 

EN14604

 

Safety Markings

 

                       

                       

                       

                       

Отзывы: