Model:
PIR180BK/PIR180WH
180° PIR Movement Detector
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
SAFETY AND INSTALLATION INSTRUCTIONS
11
08
15-B
T
Pack contents:
Stand-alone PIR sensor x 1
Screw pack
x 1
TECHNICAL INFORMATION:
• Voltage: 230VAC 50 Hz.
• Fuse rating: Type 50F, 6.3A/250VAC, 5 x 20mm.
• Wattage: max.1000W for incandescent load.
• Wattage: max. 300W for fluorescent load.
• Detection angle: approx.180°.
• Detection distance: max.12 metres.
• Duration time: from (10±5) seconds up to (4±1) minutes adjustable.
• Lux control level: from daylight to night adjustable.
• IP44 rating.
• Sensitivity (range) adjustable.
CLEANING:
Clean this fitting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
EVENTUALLY, YOU MAY WANT TO REPLACE THIS FITTING:
When your fitting comes to the end of its life or you choose to update or upgrade it by replacing it,
please do not dispose of it with your normal household waste, please recycle where facilities exist. When
you need to dispose of this fitting, check with your retailer or local authority for suitable options. New
regulations require the recycling of Waste from Electrical and Electronic Equipment (European “WEEE
Directive” effective August 2005—UK WEEE Regulations effective 2nd January 2007). Environment Agency
Registered Producer: WEE/GA0248QZ
IF YOU EXPERIENCE PROBLEMS:
If your PIR180BK/WH is defective or develops a fault, please return it to the place where you bought
it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna
Lighting product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: [email protected]
Visit our website:
www.eterna-lighting.co.uk
IP44
