If you experience problems:
If your light is defective or develops a fault, please return it to the place where you bought it. You can call
our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product
but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Help line:
Tel: 01933 673 144 Fax: 01933 678 083 Email: [email protected]
For answers to frequently asked questions ( FAQs ) and other information visit our web-site
Lamp replacement:
>
Switch off the electricity at the mains.
>
Remove the diffuser from the front of the fitting by inserting a wide bladed screwdriver into each of the
slots at the side of the diffuser in turn, and twisting gently to release.
>
Remove and replace lamp.
>
Press the diffuser into place ensuring that all of the retaining clips have snapped into position
correctly and that the diffuser is secure.
>
Restore the power and switch on.
Replacement lamp type:
Wattage: 60 W
Supply Voltage: 230 V
Type: BC GLS
Cleaning:
>
Disconnect the power and clean the exterior only of this fitting with a moist ( not wet ) cloth.
>
Do not use any chemical or abrasive cleaners.
Eventually, you may want to replace this light fitting:
When your light fitting comes to the end of it’s life or you choose to update or upgrade it
by replacing it, please do not dispose of it with your normal household waste, please
recycle where facilities exist. When you need to dispose of this fitting, check with your
retailer or local authority for suitable options. New regulations will encourage the
recycling of Waste from Electrical and Electronic Equipment ( European “WEEE
Directive” effective August 2005 ).
PLEASE READ THESE INSTRUCTIONS BEFORE
INSTALLING YOUR NEW FITTING
- -
PLEASE RETAIN FOR FUTURE REFERENCE
PIR Bulkhead
Model(s)
PIR80BK
Pack contents:
Bulkhead light with integral PIR
1
