Eterna ETA 251.262, Руководство пользователя

Страница: 6 / 35

5
2.2 SETTING THE TIME
CROWN
5 PULLED OUT TO POSITION C
To set the time, unscrew the crown and pull it out 5 two
notches until in position C . Turn the crown clockwise or
anti-clockwise to position the hands to the desired time.
When the hour hand passes the 12 o'clock position, you will
see whether it is indicating midnight (the date changes) or
midday (the date does not change). Check that the date set
previously has not changed. Once the setting is complete,
push the crown back in against the case to the rest position
A and screw it back in. The hands will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position C
when the small seconds hand 3 is at precisely 12
o'clock, and pushing it back in to synchronise with
an official time signal, then screwing it down.
2.3 RAPID DATE CORRECTION
CROWN
5 PULLED OUT TO INTERMEDIATE POSITION B
Unscrew the crown 5 and pull it out one notch to position
B . Turn it clockwise until the correct date appears in the
window 4 . Then push the crown 5 back against the case
into the rest position A , and screw it back in.
EN
G
LI
SH
5