Page | 7
Replace fuse
Overvoltages, short circuits or unsuitable mains connections can cause a fuse to burn through. The
device does not work when the fuse is blown. If your device burns a backup, perform the following
steps.
1.
Disconnect the mains plug.
2.
Insert a flat screwdriver into the slot of the fuse cover. Lever the cover gently. The fuse now
comes to light.
3.
Remove the old backup. If you look brown or milky, it is burned.
4.
Insert the new fuse into the holder. Close the cover. Use only a fuse of the same type and the
same specifications. Observe the label with the technical data
.
Product description:
The LED Six Hole Light produces countless LED Beams, which are thrown into the room through its 6
lenses. With its RGBWY color LEDs, it changes the colors according to its movement. The DMX,
automatic mode and the master slave function enable many areas of application, from the party
cellar to the club.
Technical specifications:
Power consumption: 30W
Power supply: 90 - 260V
Voltage frequency: 50 / 60Hz
Operating modes: DMX512, automatic, master / slave,
music-controlled
Diod type: 5in1 LEDs
Number of diodes: 5 per 3 watts
Color: RGBWY
Dimmer: 0 - 100%
Number of DMX channels: 3, 5 or 8
DMX standard: DMX 512
AC IN: IEC - C14
DMX IN: XLR - 3-pin
DMX OUT: XLR - 3-pin
Protection class: IP20
Fan cooled
Height: [cm] 25
Width: [cm] 26
Depth: [cm] 25
Weight: [kg] 3,6
1.
Содержание 0716715133048
Страница 1: ...LED Six Hole ...
