1
Warning
Thanks for your purchase of
ETCR9200 H/L Voltage Clamp
Current Meter
of our company. In order to make better use of this
product, please make sure to:
——
Read this manual in detail and the operator must
totally understand this manual and be in proficient in
operation of this meter before making test on spot.
——
Strictly comply with the security rules and notice
items listed on this manual.
u
In any case, it should pay special attention to safety in use of
this meter, particularly in measurement of circuitry with more than
AC100V and above voltages.
u
If the voltage of tested circuitry has exceeded 600V, it must
be used by connecting with an insulation rod.
u
As it is very dangerous of high voltage transmission line, the
operator must get strict training and the relevant certification on
high-pressure operation of the state before using this meter and
making a field test.
u
It is forbidden to use the meter test voltage more than 35 kV
convergence of bare wire or bus
u
Please pay attention to marked words and symbols on panel
or backboard of this meter.
u
Please do not put or store this meter in the place of high
temperature, with moisture, with frozen dew or with direct
daylight irradiation for a long time.
u
Please note the battery polarity when replacing battery, and
remove the battery if you expect not to use this meter for a long
time.
u
It must be operated by qualified staff that has the
authorization on tearing down or repairing this meter.
u
Please do not use it when there is any damage on the
transducer clamp or other parts of this meter.