15
bit lower. Please replace battery. 15 minutes after powering on the
meter, if it remains idle, an auto-power off procedure starts to
preserve the battery life and LCD will continue flash until the
complete switch off takes place after 30 seconds. In case of LCD
continuous flash, press
POWER
button, then the meter will
continue to work.
Under
HOLD
mode, press
POWER
to power off.
Under data reference, first, press
POWER
button( for 3 seconds )
to exit data reference mode, then come back to data receive mode,
press
POWER
button once again to power off. During exit from
data reference, it will display the symbol of
“
End
”
.
2. Data Reception
After normal power on, the receiver will under receiving mode. If
there are emission data, the receiver will display the test result real
time. If it has not received any signal, the receiver will search
signals constantly, and display
“
no- -
”
symbol dynamically.
3. Data Maintenance
Under Data Reception mod, press
HOLD
button, keep LCD
display,
“
HOLD
”
symbol indication. Press
HOLD
button once
again to relieve data lock, return to data reception mode,
“
HOLD
”
symbol display.
4. Data Memory
Under Date Reception mode, press
HOLD
button to maintain data,
meanwhile, the receiver will automatically form serial numbers,
and memory the current preserved data. During the storage,
“
MEM
”
symbol will display once by flash. The receiver can memory
99 groups of data, in case of full storage,
“
FULL
”
symbol will
display by flash continuously, and it cannot continue to memory
until cleaning out the previous memory.
5. Data Reference
Under Data Reception mode, press
HOLD
+
POWER
button to
enter Data Reference mode,
“
MR
”
symbol display, meanwhile, it
will automatically display data saved in the group 1. Then press