Safety Considerations
8
General Operation and Use Guidelines
•
This fixture is only allowed to be operated with the maximum alternating current that is
stated in the technical specifications label provided on the fixture.
•
Lighting effects are not designed for permanent operation. Consistent operation breaks
may ensure that the fixture will serve you for a long time without defects.
•
Do not shake the fixture. Avoid brute force when installing or operating the fixture.
•
When choosing the installation location, make sure that the fixture is not exposed to
extreme heat, moisture, or dust.
•
If using the supplied Omega brackets with quick-locking thumb screws for fixture hanging,
ensure that the thumb screws have engaged a complete 90-degree positive latch.
•
Operate the fixture only after having familiarized yourself with its functions. Do not permit
other persons who are not qualified and familiar with its functions to operate the fixture.
•
Please use the original packaging if the fixture is to be transported. ETC and High End
Systems, Inc. will not be responsible for the fixture if packaging other than manufacturer
provided packaging is used.
•
Do not modify the fixture. Any modifications will void the warranty.
•
This manual describes the proper installation and operation of this fixture. Using this
fixture in any way other than the intended use may cause damage and may void the
warranty.
•
Misuse of this fixture or using it in a way different from the methods described in this
manual may lead to personal injury and/or equipment failure.
•
The light source of this fixture is not replaceable. When the light source reaches its end of
life, replace the fixture.
•
If you do not provide power to the fixture, the battery on the TurboRay may drain fully
after 7–10 days. After you provide power to the fixture, the battery will recharge within 3–
4 hours.