9
English
Setting the angle within the yoke
Step 1:
Loosen the yoke locking knobs (see
Figure 11
).
Do not
remove them.
Step 2:
Tilt the luminaire to the desired position.
Step 3:
Tighten the yoke locking knobs to secure in position.
Adjusting the optional balance yoke position — 15°-30° Zoom
The Source Four 15°-30° Zoom has an optional balance yoke bracket (ETC part # 7060A2028) for
repositioning the fixture’s center of gravity. It is also equipped with a moveable yoke for setting the
fixture’s angle.
Setting the balance yoke
Step 1:
Loosen the balance yoke’s clutch hex bolts on either side of the luminaire.
Step 2:
Adjust the balance yoke so it is perpendicular to the luminaire as shown in
Figure 12
. If
front of the luminaire has several accessories attached, you may need to tilt the balance
yoke towards the front of the luminaire to adjust the balance.
Step 3:
Tighten the balance yoke’s clutch hex bolts to secure the yoke into position.
C A U T I O N :
Once the balance yoke is locked, adjustments should only be made to the
moveable yoke.
Yoke locking knob
Figure 11
Moveable yoke
Figure 12
Clutch hex bolt
Balance yoke
Содержание Source Four Zoom CE
Страница 14: ...12 Source Four Zoom CE User Manual English...
Страница 15: ...13 English...
