ETC Installation Guide
500kcmil Kit (240V/277V)
500kcmil Kit (240V/277V)
Page 2 of 3
Electronic Theatre Controls, Inc.
4:
Remove the neutral bars.
Install
Step 3
Step 1
Step 4
Step 3
Step 2
2:
Use the previously removed 3/8 -16 nuts to install the
500kcmil lugs in the same location as the removed
lugs.
3:
Use the four previously removed 10-32 screws to
attach the neutral bars to the panel interior and
reattach the small neutral wire as shown at left.
4:
Use the supplied 1/4-20 bolt to install the 500kcmil
lug end of the neutral assembly to the plastic standoff
as shown at left.
5:
Replace the plastic cover over the front of the
Sensor IQ panel.
1:
Install the plastic standoff as shown at
right.
