ETC Setup and Connect Guide
Paradigm 18 inch Touchscreen
P-TS18 Touchscreen
Page 6 of 15
ETC
Notice the lower right hand corner of the shell displays software versions of both the “Shell Version” and
the “App Version”. The “App Version” represented is the version of Virtual Touchscreen Software that is
currently installed.
Three tabs are located on the Application Shell including “General”, “Device Setup” and “Advanced”.
General Tab
The “General” tab is provided as the interface to launch and manage the Virtual Touchscreen Software.
[Launch Virtual Touchscreen]
The Virtual Touchscreen Setup Guide is available for download on the ETC website at
etcconnect.com.
Install Management
This section of the “General” tab provides the ability to [Uninstall] Virtual Touchscreen Software or install
a newer version from either removable media or the connected Paradigm Central Control Server (P-CCS).
Note:
The Application Shell software is included with each installation of the P-TS18. Updates
to the shell are combined with VTS application updates when necessary.
Note:
Touchscreen configurations are created in ControlDesigner and associated to a Virtual
Touchscreen instance in LightDesigner. Reference the online help systems for
ControlDesigner and LightDesigner for details to create and associate touchscreen
configurations.
Note:
If a current version of VTS is installed, the [Install from Removable Media] and [Install from
Online P-CCS] buttons are disabled. You must first uninstall the software before installing
a new version. Reference
[Uninstall]
for details.
To launch the Virtual Touchscreen Software touch the
[Launch Virtual Touchscreen] button located on the
“General” tab.
The VTS application launches to the “Discovered Servers”
list. Select the Central Control Server to continue with
configuration selection.