Echoflex Installation Guide
LED Fixture Controller
Corporate Headquarters
Middleton, WI, USA
|
Phone
+1 608 831 4116
Web
|
info@echoflexsolutions.com
|
Support
© 2021 Echoflex Solutions, Inc. Trademark and patent info:
Echoflex intends this document to be provided in its entirety. Product information and specifications subject to change.
8189M2100
Rev A Released 2021-03
Overview
The ELED1 Fixture Controller provides wireless control of individual fixture or
single zone lighting based on occupancy state, manual switch action,
ambient light levels, and gateway commands.
This document covers installation of the ELED1 LED Fixture Controller
models. The
Echoflex LED Fixture Controller ELED1(H) Configuration Guide
is available for download at
The package contents includes the controller, installation guide, and
mounting strap (for ELED1-BUS model).
Prepare for Installation
Echoflex recommends paying special attention to the installation
environment.
• High density construction materials and large metal appliances or
fixtures in the space may disrupt wireless reception.
• Mount the controller to an electrical junction box or a panel in a
location and at a height where it is not subject to tampering by
unauthorized personnel.
Supplies required to install the controller (not provided):
• Appropriately sized wire nuts
• Wire insulation
• Small cable ties
• Two 3/8 inch #8 metal screws (for surface mounting strap only)
Violet
ELED1-BUS
BUS
8189M2100
ELED1-BUN
